Tag: ASRock

ASRock E3C226D2I Mini ITX motherboard and “Host is powered OFF or is in Sleep Mode.”

The ASRock E3C226D2I motherboard has great features for a nice Mini ITX SOHO server or NAS (more details to follow in a later post), but it also has its quirks when it comes to the two RAM slots.

So, if you encounter the following error message when accessing the remote console (using the Java applet):

Host is powered OFF or is in Sleep Mode.

Or if you see no output (a blank screen) at boot-time on a display connected to the VGA port, check that the RAM DIMMs are sitting correctly in the RAM slots. This is a bit tricky as first, there’s usually not a lot of maneuvering space in a Mini ITX case,  so applying pressure is difficult, second this motherboard’s RAM slots are particularly tricky to handle.

My advice is to unplug the device, unlock a RAM slot, then try inserting the DIMM (in correct orientation, check the notch!) smoothly with low and equal pressure on both sides. Once it’s more or less equally placed in the slot, apply firm pressure on the top of the DIMM at the side opposite of the slot’s open lock until you hear a click sound of the DIMM snapping in. Then apply firm pressure on the other side of the DIMM till that part snaps in with an audible click too (the lock will close).

Sounds pretty standard? It actually is, with the exception that this board’s RAM slots require a lot more pressure for the DIMMs to snap in than with most other motherboards out there.